Method 5: Determination of particulate emissions from stationary sources

[ Sample Cases ]  [ Umbilical Cables ]  [ Umbilical Adapters ]

SAMPLE CASES, HEATED FILTER BOXES, INSULATED IMPINGER BOXES

ESC heated filter boxes, probe support adapters, impinger boxes, inlet strain reliefs and impinger outlet adapters can be arranged in numerous configurations to perform virtually any isokinetic and most non-isokinetic test methods. All are made of sturdy, lightweight aluminum and are properly insulated to maintain the temperatures required by EPA methodology. The impinger box slides on and locks directly to the rear of the heated filter box as a single unit and can be suspended with reliable balance from a suspension rail.

M5-SC( ) Modular Sample Case

The modular sample case is an assembly of the M5-HB standard heated filter box and a choice of 4-impinger (M5-SC4), 6-impinger (M5-SC6) or 8-impinger cold box (M5-SC8).

The M5-HB heated filter box has a sturdy monorail attachment bracket, opposing doors for easy handling of the filter assembly, stainless steel hardware and a removable heavy-duty stainless steel probe support clamp. The innovative construction design eliminates stresses and flexing when a long probe is attached. The modular 700W heating and electrical assembly can easily be removed for replacement or service. An extra modular assembly on hand is like having a backup heated filter box. Outside dimensions: 9-1/2"L x 9-1/2"W x 231/2"H, probe support extends 7-1/2" from front.

The M5-CFB compact heated filter box is ideal for sampling in tightly constrained areas and is easily used at any traverse angle between horizontal and vertical. This versatile filter box is also equipped with a modular heat and electrical assembly. We carry a variety of outlet fittings that allow either direct connection of an umbilical cable or for passing a flexible Teflon line through the fitting for direct connection to the filter. Outside dimensions: 10"L x 8-3/4"W x 11-1/2"H, probe support extends 7-1/2" from front.

The M5-HB-H/E (left) and M5-CFB-H/E  (right) Modular Heat and Electrical Assemblies are removable and replaceable on all ESC
heated filter boxes. 
One of these assemblies on hand provides a backup filter box! 

M5-CB-PA Probe Support Adapter Panel 
The M5-CB-PA probe support adapter panel is the solution for test methods that do not require a heated filter box. The impinger box mounts to the rear of the panel and locks in place. Shown with M5-CB6 impinger box and M5-UA impinger outlet adapter. The inset is our M5-JB-1 power box that supplies auxiliary power and power to the probe.

Insulated Impinger Boxes

ESC impinger boxes are available in 4-impinger, 6-impinger and 8-impinger nominal sizes. Each has a stout handle with centering loop and mounting locations for the aluminum slide block on opposing sides for the impinger inlet strain relief and impinger outlet adapter. The impinger box insulation is waterproof to eliminate breakdown and the corners are fully welded to accommodate the extra weight of ice and water. Removable insulated impinger box covers are available.

STANDARD UMBILICAL CABLES

ESC flexible umbilical cables include one high vacuum sample line with 1/2"quick connects, three vinly pressure lines for pitots and Orsat sample line, 5 type K thermocouple lines, one 5-conductor electrical cable with 4-pin amphenol connectors and one full length stranded nylon strain relief cable. Each line is sheathed with an abrasion resistance expandable braided jacket. Standard umbilical lengths are 25' (UC-25), 50' (UC-50), and 100' (UC-100). Standard cables have brass quick connects. Stainless steel quick connects are available (add extension -S to part number). Our popular EXT style umbilicals include 15 Amp extension cords in place of the power cable with amphenol connectors. No more soldering amphenols on the stack. Consoles and heated filter boxes must be equipped with suitable 3-prong connectors (standard on all C-5000 consoles).

UMBILICAL ADAPTERS

Umbilical adapters, also known as shower heads or goosenecks, have a #28 socket, thermocouple, 1/2" sample line male quick connect and support arm that inserts in the impinger box slide bracket. Our umbilical adapter can be ordered with (M5-UA) or without (M5-UA-X) a one-way check valve that prevents backflushing of the impinger contents.

Impinger inlet adapters connect heated or unheated sample transfer lines to the inlet of the first impinger. Impinger inlet adapters come in a variety of sizes depending upon the size and type of transfer line used and with a choice of tube fittings or quick connects. Inlet adapters are available with or without a strain relief support arm that inserts in the impinger box slide bracket on the opposite side of the impinger box from the impinger outlet umbilical adapter.